Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 – Full Review of the Built-In Induction Hob with Integrated Extractor Hood 72 cm, Black Glass, Class A

The Elica NIKOLATESLA FIT 3Z BL/A/72 (PRF0184551 – EAN 8020283054684) is a built-in induction hob 72 cm with integrated extractor hood, black glass finish, energy class A, from the NikolaTesla line by Elica. The NikolaTesla range integrates cooking and extraction into a single built-in unit, capturing fumes and odours directly at the source from below — the ideal solution for open-plan kitchens, islands and peninsulas where a traditional wall or ceiling hood would compromise visibility and design. The NIKOLATESLA FIT 3Z BL/A/72 model distinguishes itself with: 3 zone di cottura, bilancia integrata, touch slider, vetro nero. Energy class A. Made in Italy, Fabriano (AN).

Key Features

• Model: NIKOLATESLA FIT 3Z BL/A/72
• Code: PRF0184551
• EAN: 8020283054684
• Line: NikolaTesla – Elica
• Type: Built-in induction hob with integrated extractor hood
• Width: 72 cm
• Finish: Black Glass
• Energy class: A
• Installation: Built-in
• Extraction: Integrated (downdraft)
• Made in Italy – Fabriano (AN)

Assessment

The Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 belongs to the NikolaTesla family — Elica's range of extractor hobs that integrate cooking and extraction in a single built-in product. The NikolaTesla system captures fumes, vapours and odours directly from the cooking surface, without requiring a wall or ceiling hood: the ideal solution for open-plan kitchens and islands. The NIKOLATESLA FIT 3Z BL/A/72 model is distinguished by: 3 zone di cottura, bilancia integrata, touch slider, vetro nero. Energy class A places this model at standard efficiency level in the NikolaTesla EVO range.

FAQ

How does the integrated extraction system of the Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 work?

The extraction system of the Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 is a downdraft system fully integrated into the hob: the extraction zone is positioned at the centre of the hob and captures fumes, vapours and odours directly at the source. The system is invisible when not in use and activated via integrated touch controls. Autocapture technology automatically adjusts extraction power based on active cooking zones, optimising energy consumption and noise levels. The combined EVO anti-grease, anti-odour and anti-humidity filter lasts up to 3–5 years and is easily regenerable by washing and drying.

Can the Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 be installed in recirculation mode?

Yes — the Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 can be installed in ducted mode using separately purchasable Elica installation kits. Recirculation kits are available with different outlet options: under-plinth (KIT0199835), out-of-plinth (KIT0199836) and rear Back Outlet (KIT0199838). The regenerable EVO filter (KIT0200786) is required for recirculation mode. The choice between ducted and recirculation depends on the feasibility of external ducting.

What cut-out dimensions are required for the Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551?

The cut-out dimensions for the Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 must be verified in the official Elica technical datasheet, available on elica.com in the product downloads section. NikolaTesla EVO 72 cm models generally have a cut-out of approximately 70×49 cm, with external dimensions of 72×51.5×21 cm. Always verify the official data for the specific model before installation, as specifications may vary slightly between versions.

Conclusion

The Elica NIKOLATESLA FIT 3Z BL/A/72 PRF0184551 is the built-in induction hob 72 cm with integrated extractor hood from Elica's NikolaTesla line: black glass finish, energy class A, 3 zone di cottura, bilancia integrata, touch slider, vetro nero, built-in installation, Made in Italy Fabriano. The solution for those seeking a 72 cm extractor hob with invisible integrated extraction, without a wall-mounted hood. Visit the official Elica website for complete NIKOLATESLA FIT 3Z BL/A/72 specifications.